주요 콘텐츠로 건너뛰기

MacBook Pro 13" Touch Bar 2018 안테나 케이블 어셈블리 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

1 단계 번역중

1 단계
MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Remove the hinge covers: 0 단계, 이미지 3개 중 1개 MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Remove the hinge covers: 0 단계, 이미지 3개 중 2개 MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Remove the hinge covers: 0 단계, 이미지 3개 중 3개
Remove the hinge covers
  • Remove the four 1.9 mm T3 Torx screws securing the plastic covers on top of the display hinges.

  • Remove both plastic hinge covers.

플라스틱 커버를 디스플레이 상단 힌지에 고정하는 T3 Torx/톡스 나사 네 개를 풀어주세요.

플라스틱 힌지 커버 두 개를 분리하세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.