주요 콘텐츠로 건너뛰기

MacBook Pro 13" Touch Bar 2018 안테나 케이블 어셈블리 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

5 단계
MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Unscrew the antenna cable assembly: 0 단계, 이미지 3개 중 1개 MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Unscrew the antenna cable assembly: 0 단계, 이미지 3개 중 2개 MacBook Pro 13" Touch Bar 2018 Antenna Cable Assembly Replacement, Unscrew the antenna cable assembly: 0 단계, 이미지 3개 중 3개
Unscrew the antenna cable assembly
  • Remove the four 1.5 mm T3 Torx screws securing the two aluminum covers on top of the two display board cables.

  • Use a pair of tweezers to remove the two aluminum covers.

두 디스플레이 케이블 커넥터 상단에 알루미늄 커버 두 개를 고정하는 1.5mm T3 Torx/톡스 나사 네 개를 풀어주세요.

핀셋을 사용하여 알루미늄 커버 두 개를 분리하세요.

[title] Unscrew the antenna cable assembly
[* red] Remove the four 1.5 mm T3 Torx screws securing the two aluminum covers on top of the two display board cables.
-[* black] Use a pair of tweezers to remove the two aluminium covers.
+[* black] Use a pair of [product|IF145-020|tweezers] to remove the two aluminum covers.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.