주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Even with a heat protector in use we highly recommend to start with low heat to loosen the adhesive of the battery cover and to raise it slowly (maximum of 100°C) if the adhesive doesn't soften.

Do not aim your heat gun vertically onto the battery cover but only in a flat angle facing the straight edge of it.

Use your heat gun to loosen the adhesive underneath the edge of the battery cover.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.