주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Install the rear panel onto the floor panel

Note: The rear panel can be recognized because there is a small grey flat cable coming out of the top.

Align the rear panel precisely over positioning holes in the floor and lower it carefully until it clicks into place.

Use the four shorter M8 bolts to fix the panel onto the floor.

WARNING! Be careful not to tilt over the panels. The system is only stable after the roof has been installed.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.