주요 콘텐츠로 건너뛰기
도움말

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 27개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Before starting this procedure, you should disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide to disable Auto Boot.

If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.

Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down.

Use a P5 driver to remove the following screws:

Two 7.9 mm screws

Two 7.1 mm screws

Six 2.6 mm screws

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.