주요 콘텐츠로 건너뛰기
도움말
5단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 15 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Apply a suction cup to the back of the phone, as close to the center of the left edge as possible.

Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

Insert the point of an opening pick into the gap.

As the glass on this edge is curved, you won't be able to insert this pick very far. As long as the very tip of the pick is underneath the glass's edge, you will be able to proceed.

Due to tight tolerances, this may take multiple attempts.

If you are having trouble creating a gap, apply more heat to the edge and try again.

You can try also applying a few drops of high concentration (over 90%) isopropyl alcohol into the seam to help loosen the adhesive.

Do not apply excessive force with the pick, or you risk cracking the back cover glass.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.