주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the 4mm screw that holds the propeller to the axle using a Phillips #00 screwdriver.

When re-assembling your drone, be careful not to over tighten the screws. The drone body is made of soft plastic, doing so may strip the screws' housing and prevent them from holding.

Remove the propeller by pulling it upwards away from the assembly.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.