주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the three 6mm screws holding the propeller guard with a Phillips #00 screwdriver

The drone motor may be magnetized, making it difficult to remove or install the screws. Using the tweezers to grip them is recommended.

When re-assembling your drone, be careful not to over tighten the screws. The drone body is made of soft plastic, doing so may strip the screws' housing and prevent them from holding.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.