주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the three 6mm screws with a Phillips #00 screwdriver.

Some of the screws may not completely remove from the black housing. A slight tap may jar them loose, but this is not necessary.

When re-assembling your drone, be careful not to over tighten the screws. The drone body is made of soft plastic, doing so may strip the screws' housing and prevent them from holding.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.