주요 콘텐츠로 건너뛰기
도움말
19단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next three steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips.

If you've already verified that your iMac is working correctly and are ready to seal it up, skip to step 22.

Insert the display power cable into its socket on the logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.