VanMoof S3 Bell Button Replacement

안내서로 돌아가기

영어

한국어

1 단계 번역중

1 단계

VanMoof S3 Bell Button Replacement, Screwing around.: 0 단계, 이미지 3개 중 1개

VanMoof S3 Bell Button Replacement, Screwing around.: 0 단계, 이미지 3개 중 2개

VanMoof S3 Bell Button Replacement, Screwing around.: 0 단계, 이미지 3개 중 3개

Screwing around.

In my case the button was glued additionally. Cut around it to make it loose.
Use the 2mm hex screwdriver and remove the tiny screw on the side of the bell housing.
Use the pliers to unscrew the button. Screw to the left.
You can't break what is already broken. It should come off easily, so keep cool. Although, in my case, the button top broke off.
Don't forget to turn off the bike!

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.