VanMoof S3 Bell Button Replacement

영어

한국어

2 단계 번역중

2 단계

Hexen

Loosen the 5mm screw located below the button.
If you unscrew both, you can try blowing compressed air through the holes. This may or may not solve the problem.
This screw holds the break/button part on the wheel. Later, you will need to pull it off. As you can see, the cable goes through the rubber grips.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.