주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The aluminum backplate is glued to the device and you will need a good prying tool to be able the separate the back from the plastic holder.

The glue is holds all 4 sides together, the glue also runs vertically and down the middle.

The hardest part is to start somewhere on the backplate where there is a big enough gap (between the backplate and the device) to put a prying tool in without bending the aluminum back.

Start from one of the upper corners. Slowly and carefully remove the aluminum back plate with a prying tool that is durable enough and can fit between the backplate and the device.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.