주요 콘텐츠로 건너뛰기

Replacing a Nintendo GameCube Controller Stickbox

3 단계
Replacing a Nintendo GameCube Controller Stickbox: 0 단계, 이미지 2개 중 1개 Replacing a Nintendo GameCube Controller Stickbox: 0 단계, 이미지 2개 중 2개
  • Unhook the two trigger wires on the black plastic piece.

  • Unhook the rumble motor wire.

  • Be careful with the motor wires, they are fragile.

  • Turn the motherboard around and push the two black pins down to unlock the plastic piece.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.