주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Using a Phillips #2 screwdriver, remove the two screws (circled in red) attaching the fan assembly to the unit.

Carefully disconnect the fan connector from the socket, as depicted in the second picture.

The controller connector panel can be gently pulled out of the main unit and laid down, as depicted. This is not strictly required, but may provide more maneuverability inside the case.

Make sure to not pull out the wires while removing the fan. Doing so may damage the connector wire or the PCB.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.