주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 3 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Use blunt nose tweezers to grip the black adhesive pull tab located on the top right edge of the battery. Lift the pull tab with the tweezers until you are able to grip it with your fingers.

Pull on the pull tab with a slow, steady force at a shallow angle to prevent the pull tab from snapping in the middle.

Try to keep the adhesive strips flat and unwrinkled during this procedure; twisted or wrinkled strips will stick together and break instead of pulling out cleanly.

If the adhesive becomes hard to pull, you can roll it around a spudger and continue pulling.

If the pull tab breaks prematurely, use tweezers to retrieve the remaining length of adhesive and continue pulling.

If you are unable to retrieve it, move on to the next step.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.