주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

In the key cap well you will see the silicone rubber snap-action key switch actuator. When depressed, this brings two contacts beneath it together. This is glued in place and you will probably tear it if you try to remove it.

First of all, blow out the dust and loose dirt. Then clean out the well with isopropyl alcohol and an old toothbrush. Pay particular attention to the metalic area around the silicone. Allow it to dry.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.