Skip to main content
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Use a tweezer to slightly bent the logic board contacts on the USB connector. The purpose is to ensure a good contact when the USB connector will be applied against the logic board.

In the first picture, you can see the contacts in the original position.

In the third picture, you can see the contacts in the bent position.

Be careful, the contactors are fragile. Just slightly bent them.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.