주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

It is important to have the 2 following steps completed in a short time to guaranty a good quality gluing if you use an instant glue.

Apply some glue on the logic board and below the USB connector.

Do not apply glue on the rear part on the logic board and on the USB connector. It is important to ensure a good electrical contact between the connector and the logic board.

Place the USB connector at is original place. Use a magnifying glass to ensure all five contacts are well in place against the logic board contacts. You can use a tweezer to help.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.