Skip to main content
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Be careful, this temporary repair is very fragile. Do not apply any tension on the USB connector or with the USB cable.

Before to continue, you should ensure one more time that the connectors are well in place to prevent from any short circuit. I recommend to:

First, plug and apply the electrical power on the logic board only do not plug the hard drive or even the USB connector. Wait for a minute if everything goes well!

You should use a hold computer if any available to you. Your computer should be protected from a short circuit here but we never know. Please don't use your brand new computer!

When you are ready to go:

Plug the hard drive with the USB/SATA bridge throug the SATA connector.

Carefully plug the USB connector to the logic board and your computer.

Apply electrical power on the hard drive.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.