Skip to main content
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Locate the USB in/out component on your Lyra X2400. If you are having difficulty locating this component the picture to the left will show you where it is located.

Start using solder/desolder tools to remove the USB in/out.

Once removed replace it with the new working USB in/out.

Use the soldering tools to reattach the component back to the main logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.