Skip to main content
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Locate the DC power adaptor component on your Lyra X2400. If you are having difficulty locating this component the picture to the left will show you where it is located.

Start using solder/desolder tools to remove the DC power adaptor.

Once removed replace it with the new working DC power adaptor.

Use the soldering tools to reattach the component back to the main logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.