주요 콘텐츠로 건너뛰기
도움말
16단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Set the optical drive assembly into the optical drive bay. There are two screws that line up onto a track in the bottom of the bay.

Warning: Carefully route the cabling so that it is not pinched or disconnected when fitting the carrier into the optical bay.

Fully insert so the drive assembly is flush with the bay.

New optical drive is installed. Reassemble Mac Pro.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.