Skip to main content
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the ribbon cable from the exposed side of circuit board near the headphone jack.

Carefully lift up the circuit board on the detached side.

There is another ribbon cable attached to the underside of the circuit board.

Disconnect the second ribbon cable by pulling the end of the ribbon from its housing on the circuit board with tweezers.

The circuit board is extremely delicate. Move carefully and don't rush on this step!

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.