E-bike Disassembly of frame for painting (model: HNF UD1)

안내서로 돌아가기

영어

한국어

이전 단계 다음 단계

16 단계 번역중

16 단계

E-bike Disassembly of frame for painting (model: HNF UD1), Remove plug and cable of back lamp: 0 단계, 이미지 3개 중 1개

E-bike Disassembly of frame for painting (model: HNF UD1), Remove plug and cable of back lamp: 0 단계, 이미지 3개 중 2개

E-bike Disassembly of frame for painting (model: HNF UD1), Remove plug and cable of back lamp: 0 단계, 이미지 3개 중 3개

Remove plug and cable of back lamp

Located in 3. place from the left is the back lamp's cable and plug
It runs directly to the back of the bike and exits the drive units frame part on a hole around the kickstand just below the rear fender
The cable runs through the inner side of the rear fender and ends in the back lamp

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.