주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 13 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Be careful when you isolate the battery using a battery blocker. The battery contacts are easily bent or broken, resulting in irreversible damage.

Ensure that the iFixit logo on the battery blocker is facing up.

Slide the battery blocker underneath the left side of the logic board's battery connector at a 35 degree angle.

The battery blocker's right prong should slide between the left side of the logic board's battery connector and the battery's contact pads. The left prong should slide under the logic board.

Don't push the battery blocker underneath the connector or logic board with excessive force. If you're having trouble fitting the battery blocker underneath the logic board, refer to the next step for information on loosening the logic board. You can also try using a playing card to disconnect the battery instead.

The battery blocker or playing card should slide under the logic board without encountering any blockages. After insertion, they should rest at a 15 degree angle.

Leave the battery blocker in place as you work.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.