주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 13 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

If the battery blocker doesn't easily slide under the logic board, follow these steps to partially loosen the logic board from the frame:

Apply a few drops of high-concentration (90% or higher) isopropyl alcohol under the logic board to the left and right of the battery connection.

Wait one minute for the isopropyl alcohol to weaken the adhesive under the logic board.

Try to insert the battery blocker. If the logic board doesn't easily lift up, apply a few more drops of isopropyl alcohol.

This doesn't apply when using the playing card method to disconnect the battery because the playing card is only inserted between the battery connector and the battery contact pads.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.