주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 5 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Lift and remove the upper speaker from the frame.

There are multiple cables under the upper speaker. Be careful not to damage them while removing it.

If any cables are still attached to the upper speaker while you lift it up, carefully peel them off of the upper speaker. You can apply more isopropyl alcohol if they don't easily peel away.

If the ZIF connector sticker near the front camera comes off while removing the upper speaker, reapply it to the ZIF connector.

If the ZIF connector near the front camera disconnects while removing the upper speaker, use the pointed end of a spudger to flip up the locking flap. Then, reinsert the ribbon cable and close the locking flap.

During reassembly, make sure the right ambient light sensor is on top of its shelf.

If there's any alcohol solution remaining in the device, carefully wipe it off or allow it to air dry before reinstalling the upper speaker.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.