주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the metal casing from the logic board.

There are three ribbons that connect the lens to the logic board as shown.

Place the flat end of the spudger underneath one of the black flaps. Carefully lift the flap with the spudger and gently slide the ribbon out.

Repeat the above process to remove the remaining two ribbons.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.