Skip to main content
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The electric motor is held in place by two different things.

Firstly two screws and a yellow plastic bracket.

Also on the right is a clip that hold the motor and gearbox in place. You can release this by inserting a pallet knife or a screwdriver between the motor and case

Note that you won't be able to completely remove the engine at this point as it is still connected by wires

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.