주요 콘텐츠로 건너뛰기
도움말
10단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The console is held in place by the 4 inner screws, note you don't need to remove the outer screws or screws in the handlebars

Note how the block attached to the lever is positioned against the switch. In my train this was 180degrees reversed and hence the lever did not do anything.

The three buttons need to be correctly orientated, they have little bars to fit into slots

Note the newer model may look slightly different to this

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.