Skip to main content
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The clips disengaged in the next bullet may weaken and break after unclipping them.

Detach the display screen from the logic board by using a spudger to unclip the four clips holding the display screen (circled in Picture 1). Gently pull the display screen away from the logic board so that none of the clips are engaged.

The display screen is attached to the logic board by a metal ribbon. Remove the display screen by disengaging the ribbon lock. Use a spudger to push the thin black bar down (circled in Picture 2). Gently pull the display screen and ribbon out of the logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.