주요 콘텐츠로 건너뛰기

Xbox Series X|S 무선 컨트롤러(모델 1914) 완전 분해

3 단계
Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the front and backplate: 0 단계, 이미지 3개 중 1개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the front and backplate: 0 단계, 이미지 3개 중 2개 Xbox Series X|S Wireless Controller (Model 1914) Full Disassembly, Removing the front and backplate: 0 단계, 이미지 3개 중 3개
Removing the front and backplate
  • Remove 5 screws shown on the picture using the T8 bit.

  • The screw in the middle is underneath the sticker in the battery bay. You can push the screwdriver bit through the sticker, or peel it away. There is only one screw!

  • Please note that this makes both the front and back plates completely loose from the controller.

T8 비트 드라이버를 사용하여 사진에 표시된 나사 5개를 풀어주세요.

중간 나사는 배터리 칸에 있는 스티커 아래에 있습니다. 드라이버 비트를 스티커 사이로 밀어 넣거나 스티커를 떼어내면 됩니다. 나사는 하나뿐입니다!

이로 인해 전면 및 후면 덮개가 모두 컨트롤러에서 완전히 분리된다는 점에 유의하세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.