주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Rotate the assembly so that the green circuit board is facing you as shown in the first picture.

Flip board over so it is oriented as shown in the second picture.

Using a Phillips #1 Screwdriver, turn the small knob very slightly counter-clockwise—a few degrees to, at most, one-quarter turn.

You can find instructions for testing to make sure your repair worked at this link.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.