주요 콘텐츠로 건너뛰기

iPad 7 LCD Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 15개에 영향을 미칩니다.

3 단계
iPad 7 LCD Replacement, Disconnect the battery: 0 단계, 이미지 1개 중 1개
Disconnect the battery
  • Use a Phillips screwdriver to remove the single 2.3 mm-long screw securing the battery connector to the logic board.

십자 드라이버를 사용하여 배터리 커넥터를 로직 보드에 고정하는 2.3mm 길이의 나사 하나를 풀어주세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.