주요 콘텐츠로 건너뛰기

iPad 7 Logic Board Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

11 단계
iPad 7 Logic Board Replacement, Disconnect the antennas: 0 단계, 이미지 3개 중 1개 iPad 7 Logic Board Replacement, Disconnect the antennas: 0 단계, 이미지 3개 중 2개 iPad 7 Logic Board Replacement, Disconnect the antennas: 0 단계, 이미지 3개 중 3개
Disconnect the antennas
  • Use the tip of a spudger to pry up and disconnect the left antenna's coaxial cable.

  • Repeat for the right antenna's coaxial cable.

  • During reassembly, these can be tricky to reconnect. Hold each connector in place over its socket and press down with the flat end of a spudger. The connector should snap into place.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.