주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Be careful when using a heat gun in the forthcoming steps. Use it at a very low heat setting, and make sure not to melt the touch screen plastics or Home button. The metal frame tends to conduct heat very well so try to avoid touching these hot areas.

If the glass has shattered at the top or bottom be especially patient and gentle when removing fragments. In extreme cases you may have to pick off any glass shards that remain glued to the plastics.

Using a heat gun or hairdryer, heat the top left area of the touch screen.

Use your fingernails to slowly lift up the left corner. The touch screen plastics are held to the touch screen with adhesive. It may take some work to free the corners.

If it seems like too much force is being applied to lift the touch screen plastics, try using the heat gun again.

Heat and repeat for the right side.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.