주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

If you are not using a fuse resistor, skip this step. Otherwise, continue.

Insert and solder the new fuse resistor to F1 socket.

The fuse resistor should sit on the topside of the board and the leads should be exposed on the underside. Orientation of the fuse resistor does not matter

The 10M 1/2 watt resistor in the picture is used to depict what a fuse resistor might look like.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.