메인 콘텐츠로 스킵하기
도움말
23단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 43 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

If you are replacing the display panel, you may need to transfer additional components from the old panel to the new one. Compare the back of the old display with the replacement display. Note all cables, sensors, and foam cushioning that are missing from the new display.

If there is a wire or cable underneath adhesive tape, always pull the tape off first.

If the cable is glued to the chassis, use a heated iOpener or a hair dryer to soften the adhesive first. You can then slide an opening pick underneath the cable to loosen it. Never pull directly on the delicate connectors.

Slide an opening pick underneath the foam cushion pieces to separate them from the display, and gently pull them off. You may need some double sided tape to re-attach them to the new display.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.