Skip to main content
1단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 2 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

The CPU will most likely be stuck to the heat sink with thermal compound.

Insert the flat end of a spudger between the CPU and heat sink.

Gently pry the CPU up by slightly twisting the spudger.

Remove the CPU from the heat sink. Be careful not to touch the contacts.

To install a new CPU, see our thermal paste guide for instructions on cleaning and preparing the thermal surfaces and applying a new layer of thermal compound onto the CPU and GPU dies.

For the VRAM chips surrounding the GPU, install thermal pads or a thick thermal paste such as K5-PRO, rather than regular thermal paste.

Install your CPU into its socket on the board, not on the heat sink. Check the orientation and make sure it lines up correctly in the socket. Follow the instructions specific to your CPU type to apply fresh thermal paste to the surface of your CPU. Then, reinstall the heat sink over the top.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.