주요 콘텐츠로 건너뛰기

iFixit은 쿠키를 사용하여 사이트 기능을 개선하고 트래픽을 분석하며 광고를 개인화합니다. 당사 사이트를 사용함으로써 귀하는 당사의 쿠키 사용 및 개인정보 취급방침에 동의하게 됩니다.

Replacing a Torn Bike Seat

8 단계
Replacing a Torn Bike Seat: 0 단계, 이미지 3개 중 1개 Replacing a Torn Bike Seat: 0 단계, 이미지 3개 중 2개 Replacing a Torn Bike Seat: 0 단계, 이미지 3개 중 3개
  • Assemble the bike seat in the original clamp orientation that was observed in Step 2.

  • Slide the seat clamp onto the railing located on the underside of the bike seat.

  • Once positioned, insert the short end of the Allen key into the bolt.

  • Rotate the Allen key clockwise to screw the bolt in and tighten the seat clamp to the bike seat.

  • Make sure that the bike seat is positioned and tightened properly before usage to prevent injury.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.