주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 43 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Stick a heavy-duty suction cup near each of the two top corners of the glass panel.

To attach the suction cups, first position the suction cup with the movable handle parallel to the face of the glass panel (as highlighted in the second picture).

While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle (as highlighted by the third picture).

If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a damp soft, lint-free cloth. (Dampen with distilled water, and if needed, an equal ratio of distilled water and white vinegar for best results.)

Do not use the suction cups to carry the display glass because if one of them fails to stick, you could drop the screen and break it.

The original iMac box makes a good place to store the glass panel. Otherwise, a padded horizontal surface, like a towel on a desk will do nicely.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.