Skip to main content
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

On reassembly, you have to position the steel cap in the center of copper contact ring, placing plastic sticker into its respective cavity on the back of the button.

Press the sticker firmly into its place. Don't worry if it doesnt stick all the way round. its position under the glass keeps the details in place. Again, try to prevent touching the glue while disassembling.

Congrats! Re-assemble your device and enjoy your revived home button!

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.