Skip to main content
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Unplugging the zif (zero insertion force) connector: The flex cable is held down by a black bar that swings up. To unclamp it, run a pair of blunt tweezers underneath the cable. Twist and pull and this causes the black latch that's holding down the flex cable to open. Then the flex cable can be pulled out of the zif with the tweezers.

Since the screws holding the screen have already been removed, the phone keyboard containing half of the phone can be lifted away from the screen now.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.