주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Use the flat end of a spudger to lift the power supply up off the posts in the rear housing.

Lift and remove the power supply from the rear housing.

Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

During reassembly ensure that the rubber grommet on the AC power harness is in the slot in the power-supply cover.

Ensure that the green ground wires are secured under the power-supply cover.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.