주요 콘텐츠로 건너뛰기
도움말
10단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 4 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Find a connector on the motherboard labeled HD TMP or HDD TEMP.

If you have trouble locating it, trace the two-wire temperature cable you disconnected from the old hard drive.

If the previous temperature cable is still connected to the board here, disconnect and remove it. You will no longer need it.

Connect the temperature sensor's two-wire red-black cable to the motherboard plug labeled HD TMP or HDD TEMP.

The connector is keyed to fit in one way only. If it seems like the connector is not fitting the socket, flip the connector and try again.

Route the excess wire so it does not interfere with any other components.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.