Skip to main content
도움말
9단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Fit the replacement screen into the black frame.

The ribbon should lay on the same side as the hinge.

Make sure the screw holes in the circuit board line up with screw holes in the black frame.

Fasten the screen and circuit board to the black frame with the four silver screws.

Be careful not to lose these screws when screwing them back in. They are very small and hard to handle.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.