Skip to main content
도움말
10단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Fit ribbon back into the hinge slot as shown in the first photo.

Insert the cover's plastic teeth (shown in the second photo) into the slot in the hinge.

Fasten the cover to the the rest of the screen frame with the four silver screws (two on each side).

Be careful because, again, the screws are very small.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.