주요 콘텐츠로 건너뛰기

iPhone 13 WiFi Chip Replacement

3 단계
iPhone 13 WiFi Chip Replacement, Remove the NAND Chip: 0 단계, 이미지 3개 중 1개 iPhone 13 WiFi Chip Replacement, Remove the NAND Chip: 0 단계, 이미지 3개 중 2개 iPhone 13 WiFi Chip Replacement, Remove the NAND Chip: 0 단계, 이미지 3개 중 3개
Remove the NAND Chip
  • It is not possible to read the Wi-Fi serial number (SN) simply by connecting the iPhone to the programming software. Therefore, we will remove the NAND chip.

  • Heat the NAND chip evenly with a hot air gun at 420°C and airflow 80.

  • Pry the NAND chip up.

  • Apply some flux to the soldering pad of the NAND chip.

  • Remove the tins from the soldering pad using braid and a soldering iron.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.