Skip to main content
도움말

단계 유형:

끌어서 재배열 합니다

If you have a floppy disk drive, it has a ribbon cable that runs over the heat-sink assembly that must be moved out of the way. To remove it, first unplug it from the system board by pulling on plastic pull ring.

The ribbon cable is fastened to the heat-sink assembly with four clips. Simply slide the ribbon cable out from under these clips and move the cable out of the way.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.